Porsche Gearbox Repair and Rebuild Service

We are one of the very few companies in the UK that specialise in repairing the Porsche 996 and Boxster 6 speed Getrag manual transmissions.

We have a 100% repair success rate with these gearboxes and have been doing them for over 14 years !

We repair gearboxes for private and trade customers including a large percentage of the Porsche specialist network in the U.K. We have all the necessary parts,tooling and experience to repair these gearboxes right first time! We are currently carrying out no less than 4 rebuilds a week.

 We have extensive experience in all Porsche manual transmission overhauls from 1960-2009.

We specialise in the overhaul and modification of Turbo, GT3 and GT2 gearboxes. Anything from noisy bearings, synchros, "typical" 2nd gear pop out or limited slip diff installations.

We are also experienced with the older gearboxes too like 901/915 and G50 gearboxes.

All the manual gearboxes we rebuild are modified internally as much as 10 modifications per rebuild to ensure correct depth of shift sleeves, engagement of gears and preloading of shift forks is but a few, these have been tried and tested and all prolong the service life of the internal components.

If you just need an oil change or a new crown wheel and pinion, either give us a call on 01625 860 826 or click the button and fill in the resulting popup form (we aim to get back to you within 24 hours!)

Gearbox Images

(Scroll through the images using the dots or arrows. Click an image to view full size)

We have a dedicated clean engine and gearbox rebuild shop, all tooling is on custom made tool boards for easy access. The room has the following equipment: -

Grinding Equipment

Grinding equipment for grinding pre-load shims and specialist 1 off pinion shaft grinding for clearance issues on custom builds such as Ultima Track Cars

75 Tonne Press

75 Tonne hydraulic/air-pneumatic press which is needed to dismantle and assemble the 996/986 Getrag gearbox

Parts Cleaner

Fully automatic hot wash parts cleaner

Hot Plate

Hot plate for heating gears and bearings to allow correct interference fitment

Porsche gearboxes are not your average gearbox so why take it to an average gearbox repair centre? We are highly specialised and have extensive experience in this area having all the tooling to set your pinion height and final drive up. Unlike 90% of so called gearbox specialists, we do a lot of re-work for private and trade customers so if you want the job done right the first time then please give us a call.

Porsche 996/997 Tiptronic gearbox oil leaks ?

The only option from a Porsche main dealer is a replacement gearbox as no parts available to repair this leak.

We have had gaskets manufactured and have been repairing these leaks for almost 10 years without any issues.

See our price list below.

Porsche Gearbox Repair Price Lists

Select Your Model to View the Price List

Boxster

2nd Gear problems repaired from £1100

Noisy bearings replaced from £999

Boxster S

2nd Gear problems repaired from £2450

Noisy bearings replaced from £1350

Boxster

2nd Gear problems repaired from £1100

Noisy bearings replaced from £999

Boxster S

2nd Gear problems repaired from £2450

Noisy bearings replaced from £1250

997

2nd Gear problems repaired from £1400

3rd gear selection faults repaired from £1150

997 S

2nd Gear problems repaired from £1400

Limited slip differentials installed from £400

(Limited slip differential price is for labour only)

996 3.4L (1997-2001)

2nd Gear problems repaired from £2450

Noisy diff pinion bearings replaced from £1350

996 3.6L (2002-2004)

2nd Gear problems repaired from £2450

Noisy  diff pinion bearings replaced from £1350

TURBO

2nd Gear problems repaired from £2250

Noisy diff pinion bearings replaced from £1999

CUP limited slip differential plates installed and setup from £1270

GT2/GT3

2nd Gear problems repaired from £2250

Noisy  diff pinion bearings replaced from £1999

CUP car crown wheel and pinion (8:32) supplied and installed from £3250

911 SC (915 )

Overhaul, includes new dog rings, synchro rings (1st/2nd/3rd/4th) and main shaft bearing from £2750

911 3.2 (915)

Overhaul, includes new dog rings, synchro rings (1st/2nd/3rd/4th) and main shaft bearing from £2750

996/997 Non-Turbo Models

Oil leaks from rear casings repaired from £1350.00

Includes new sump pan gasket, oil filter and transmission oil.

(Engine is removed for this repair)

996/997 Non-Turbo Models

Automatic Gearbox Service

Includes new sump pan gasket, oil filter and transmission oil.

£299.99

996/997 Turbo Models

Oil leaks from rear casings repaired from £1750.00

Includes new sump pan gasket, oil filter and transmission oil.

(Engine is removed for this repair)

996/997 Turbo Models

Automatic Gearbox Service

Includes new sump pan gasket, oil filter and transmission oil.

£299.99

All prices are estimated costs based on our real world experience, once a gearbox is dismantled a more accurate cost can be given by email.

All prices for gearbox repairs are for gearboxes delivered to us on a pallet.

ALL PRICES ARE SUBJECT TO CHANGE AND ARE PLUS VAT AT CURRENT RATE

Gearbox Warranty Terms & Conditions